Sonus polishing pads
The SFX foam polishing pad system was specifically designed for the Porter Cable 7424 dual-action polisher.
The foam dimensions, shape, density and backing were all factored in to the system and take full advantage of the polisher's size and power. No other foam pads harness the full potential of the Porter Cable 7424 like Sonus SFX.
Proper polishing of a paint finish requires several grades (abrasive levels) of polish. You start with a cutting polish (fine compound) to remove heavy oxidation, scratches, heavy swirl marks and stains. When these blemishes are gone or diminished to the point where they are no longer noticeable, you switch to a polish with moderate abrasiveness to finesse remaining trouble areas (without removing excessive paint thickness) and restore overall gloss. To add exceptional gloss, and maintain the high gloss finish, you use an ultra-fine polish with very low abrasives. Just as each of these polishing steps requires a different level of polish, each step demands a different density foam buffing pad.
Sonus SFX 6” polishing pads are precision made for use with dual-action polishers or a rotary buffer. Sonus SFX pads feature engineered prepolymer foams that are hydrophilic, meaning they quickly absorb polish and swell. The prepolymer foam offers superior durability and generates just the right amount of work (heat) to offer great polishing action, even with a dual-action machine.
The hydrophilic nature of the SFX pads improves polish 'hang time', which is the amount of buffing you can perform before your polish dries out, forcing you to stop and apply more polish. The benefit is an even and complete break down of the polishing oxides for a perfectly clear final finish.
Unlike most foam pads, which have their Velcro backing applied after the foam disk is cut, the Velcro backing is applied to the SFX foam in its sheet form during the foam manufacturing process. The lamination process creates a complete bond between the Velcro and foam that will not delaminate under the extreme stress of a high performance dual-action polisher.
Sonus SFX pads are very dense. They have a small, uniform cell structure that efficiently transmits energy to the polish, allowing it create a finer paint finish. Even the SFX-3 Final Finish pad is dense, whereas most final finish pads are soft and spongy. The density allows pressure to be applied to the pad, when used with a dual-action polisher, for a superior final finish.
Sonus 6" DAS FlexPlate increases machine buffing safety and comfort!
The Sonus 6" DAS FlexPlate replaces the standard Porter Cable polishing pad allowing pads to be changed quickly and easily. The Sonus DAS FlexPlate requires only 0.15 pounds per square inch of pad pressure to begin flexing, offer better comfort (less hopping) and improved polishing safety. With its unique 30 degree bevelled edge, fully-laminated Velcro backing, and advanced polyurethane foam construction, the Sonus DAS FlexPlate adds a new level of safety and quality. When used with Sonus SFX foam pads, the FlexPlate is perfectly balanced for use with the standard Porter Cable 7424.
Engineered to work with a dual-action polisher to safely remove swirls and paint damage.
A fast-action, swirl-free machine polishing pad for trouble-free repair of damaged, weathered and neglected paint. Use with Sonus Restore (SFX-1) or other compounds and paint cleaners designed to remove 1200 grit sanding marks.
Removes light swirl marks and finish marring while enhancing gloss.
A gloss-enhancing, swirl-reducing polishing pad for the regular care of paint with minor imperfections. Use with Sonus Enhance (SFX-2) or other “swirl-remover” machine polish formulas.
The world's first prepolymer final finish pad. Applies super-thin films of sealant for fast removal!
An advanced pad for applying fine polishes, glazes and waxes. New pre-polymer foam technology allows the pad to be used at higher speeds to achieve outstanding final gloss with low polish or wax residue (thin film). Use with Sonus Final Finish (SFX-3), Sonus Paintwork Cleanser, machine glazes, sealants and liquid waxes.
The Sonus DAS Buffing Bonnet is the easy way to remove polish and wax residue and bring out a radiant, high-gloss finish.